LUCE WORKS

Operator for pedestrian access points ideal for use in harsh environments or where there are specific hygiene requirements.

LUCE WORKS

The Works series models represent the ideal solution in those contexts, in which weather conditions are particularly harsh, for example on boats, or where a high level of hygiene is required. Components and screws are entirely made of AISI 316L stainless steel, which guarantees the maximum resistance. The box containing the motor and the electronics is IP65 rated and ensures maximum water and dust tightness. Available in single-leaf (up to 200 kg) or double-leaf (up to 130+130 kg) versions. The control unit is equipped with a LED alphanumeric display, a full range switching power supply (100 - 240 V 50/60 Hz) and a battery charger. The presence of a USB connector allows you to quickly and easily update the firmware as well as instantly copy operating parameters and logics to a new system. Continuous operation guaranteed.

the preassembled operator is made up of : control unit | gear motor with encoder | three-wheeled sliding carriages made of AISI 316L stainless steel | anodised aluminium supporting profile and cover | belt return made of AISI 316L stainless steel | mechanical end-stop made of AISI 316L stainless steel | belt | cable guide | A4 screw kit | lateral sides


1 sliding leaf
max. 200 kg

cod. A B
LUCEW1901 900 mm 1900 mm
LUCEW2101 1000 mm 2100 mm
LUCEW2501 1200 mm 2500 mm
LUCEW2901 1400 mm 2900 mm
LUCEW3301 1600 mm 3300 mm
LUCEW3701 1800 mm 3700 mm
LUCEW4201 2000 mm 4200 mm
LUCEW5001 2450 mm 5000 mm
LUCEW6501 3100 mm 6500 mm

2 sliding leaves
max. 130 + 130 kg

cod. A B
LUCEW1902 900 mm 1900 mm
LUCEW2102 1000 mm 2100 mm
LUCEW2502 1200 mm 2500 mm
LUCEW2902 1400 mm 2900 mm
LUCEW3302 1600 mm 3300 mm
LUCEW3702 1800 mm 3700 mm
LUCEW4202 2000 mm 4200 mm
LUCEW5002 2450 mm 5000 mm
LUCEW6502 3100 mm 6500 mm

*The values of the passage size (A) and of the leafare indicative and include an overlap of around 50 mm.

Power supply full range 100-240 Vac | 50/60 Hz
Power consumption 70 W
Power consumption in stand-by 3 W
Accessories power supply 24 Vdc = / 1 A max
Maximum speed 1 door 0,8 m/s
Maximum speed 2 doors 1,6 m/s
Maximum load 1 door 200 kg
Maximum load 2 doors 130 + 130 kg
Type and frequency of use continuous operation = 100%
Operating temperature -15°C / +50°C
Protection degree IP65
Data backup memory USB flash drive

Framed door accessories - commercial frame

01AL0030

Aluminium floor guide for one leaf.
- L. 1000 mm

01AL0031

Aluminium floor guide for one leaf.
- L. 1500 mm

01AL0032

Aluminium floor guide for one leaf.
- L. 2000 mm

01AL0035

Aluminium floor guide for one leaf.
- L. 3000 mm

01FE0018

Floor guide slider.

01AL0008

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 1000 mm

01AL0009

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 1500 mm

01AL0010

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 2000 mm

01AL0015

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 3000 mm

01AL0016

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 5670 mm

01AL0020

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 6500 mm

90RM0053

Pair of leaf fixing brackets (1 leaf).

Glass door accessories - fastening set for glass leaves with pre-drilled holes

99AC0004

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 1000 mm

99AC0005

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 1500 mm

99AC0006

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 2000 mm

99AC0016

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 3000 mm

99AC0021

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 5670 mm

99AC0029

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 6500 mm

01FE0049

Glass door slider.
- 6 piece pack

01FE0050

Glass door stainless steel slider.

01GM0001

Adhesive gasket for glass leaf.
- 6 m pack

Glass door accessories - fastening clamp set for glass leaves

99AC0001

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 1000 mm

99AC0002

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 1500 mm

99AC0003

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 2000 mm

99AC0014

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 3000 mm

99AC0015

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 5670 mm

99AC0027

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 6500 mm

01FE0049

Glass door slider.
- 6 piece pack

01FE0050

Glass door stainless steel slider.

01GM0001

Adhesive gasket for glass leaf.
- 6 m pack

Standard accessories

31PE0004

Photoelectric sensor.
- IP64

99BA0004

Pre-wired emergency battery kit.

KLUCE01W


The kit consists of:

gear motor with encoder and electronic control unit | belt return | cable guides | three-wheeled sliding carriages | belt connections | mechanical limit switch | screw kit | lateral sides


Accessories to complete the kit

01AL0037

Anodised aluminium supporting profile.
- L. 6.5 m
- 4.32 kg/m

01AL0029

Anodised aluminium supporting profile.
- L. 4.5 m
- 4.32 kg/m

01AL0023

Anodised aluminium cover.
- L. 6.5 m
- 1.52 kg/m

01AL0006

Anodised aluminium cover.
- L. 4.2 m
- 1.52 kg/m

32CG0001

Belt.
- 50 m

32CG0004

Belt.
- 1 m

KLUCE02W


The kit consists of:

gear motor with encoder and electronic control unit | belt return | cable guides | three-wheeled sliding carriages | belt connection | mechanical limit switch | screw kit | lateral sides


Accessories to complete the kit

01AL0037

Anodised aluminium supporting profile.
- L. 6.5 m
- 4.32 kg/m

01AL0029

Anodised aluminium supporting profile.
- L. 4.5 m
- 4.32 kg/m

01AL0023

Anodised aluminium cover.
- L. 6.5 m
- 1.52 kg/m

01AL0006

Anodised aluminium cover.
- L. 4.2 m
- 1.52 kg/m

32CG0001

Belt.
- 50 m

32CG0004

Belt.
- 1 m
Operator cross-section LUCE WORKS

MyONE

 


MYONE Srl
Via Abbate Tommaso, 52
30020 Quarto D’Altino
(VE) - ITALY
T +39 0422 824384
Customer Care +39 0444 751030
info@myoneautomation.com


​P.IVA (IT) 04052150275

Capitale Sociale
€ 100.000 interamente versato
Registro Imprese Tribunale di Venezia


https://www.myoneautomation.com/theme/myone/img/logo.svg Via Abbate Tommaso, 52 - 30020 - Quarto D’Altino (VE) ITALY info@myoneautomation.com +39 0422 824384 +39 0422 824384