LUCE WORKS P

Automation with external control unit for entrances with submerged doors ideal for swimming pools or spas.
Automatic sliding doors | LUCE WORKS P

LUCE WORKS P

Automation for sliding doors developed for immersing the leaves in water in compliance with the IEC 60364-7-702 standard (Requirements for special installations or locations – Swimming pools and other basins). Nuts, bolts and components are made of AISI 316L stainless steel. The motor enclosure is IP65-certified, whereas the control unit is in an external IP56 box (10 m extension cable provided). The automation is equipped with a control unit with a LED alphanumeric display, full-range switching power supply (100-240 V 50/60 Hz), and battery charger. A USB connector allows for easily and quickly updating the firmware as well as quickly duplicating parameters and operating logic in a new system. Continuous operation guaranteed.

the preassembled operator is made up of : external control unit | gear motor with encoder | three-wheeled sliding carriages made of AISI 316L stainless steel | anodised aluminium supporting profile and cover | belt return made of AISI 316L stainless steel | mechanical end-stop made of AISI 316L stainless steel | belt | cable guide | A4 screw kit | lateral sides


1 sliding leaf
max. 200 kg

cod. A B
LUCEWP1901 900 mm 1900 mm
LUCEWP2101 1000 mm 2100 mm
LUCEWP2501 1200 mm 2500 mm
LUCEWP2901 1400 mm 2900 mm
LUCEWP3301 1600 mm 3300 mm
LUCEWP3701 1800 mm 3700 mm
LUCEWP4201 2000 mm 4200 mm
LUCEWP5001 2450 mm 5000 mm
LUCEWP6501 3100 mm 6500 mm

2 sliding leaves
max. 130 + 130 kg

cod. A B
LUCEWP1902 900 mm 1900 mm
LUCEWP2102 1000 mm 2100 mm
LUCEWP2502 1200 mm 2500 mm
LUCEWP2902 1400 mm 2900 mm
LUCEWP3302 1600 mm 3300 mm
LUCEWP3702 1800 mm 3700 mm
LUCEWP4202 2000 mm 4200 mm
LUCEWP5002 2450 mm 5000 mm
LUCEWP6502 3100 mm 6500 mm

*The values of the passage size (A) and of the leafare indicative and include an overlap of around 50 mm.

Power supply full range 100-240 Vac | 50/60 Hz
Power consumption 70 W
Power consumption in stand-by 3 W
Accessories power supply 24 Vdc = / 1 A max
Maximum speed 1 door 0,8 m/s
Maximum speed 2 doors 1,6 m/s
Maximum load 1 door 200 kg
Maximum load 2 doors 130 + 130 kg
Type and frequency of use continuous operation = 100%
Operating temperature -15°C / +50°C
Protection degree IP65
Data backup memory USB flash drive

Framed door accessories - commercial frame

01AL0030

Aluminium floor guide for one leaf.
- L. 1000 mm

01AL0031

Aluminium floor guide for one leaf.
- L. 1500 mm

01AL0032

Aluminium floor guide for one leaf.
- L. 2000 mm

01AL0035

Aluminium floor guide for one leaf.
- L. 3000 mm

01FE0018

Floor guide slider.

01AL0008

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 1000 mm

01AL0009

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 1500 mm

01AL0010

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 2000 mm

01AL0015

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 3000 mm

01AL0016

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 5670 mm

01AL0020

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 6500 mm

90RM0053

Pair of leaf fixing brackets (1 leaf).

Glass door accessories - fastening set for glass leaves with pre-drilled holes

99AC0004

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 1000 mm

99AC0005

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 1500 mm

99AC0006

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 2000 mm

99AC0016

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 3000 mm

99AC0021

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 5670 mm

99AC0029

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 6500 mm

01FE0049

Glass door slider.
- 6 piece pack

01FE0050

Glass door stainless steel slider.

01GM0001

Adhesive gasket for glass leaf.
- 6 m pack

Glass door accessories - fastening clamp set for glass leaves

99AC0001

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 1000 mm

99AC0002

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 1500 mm

99AC0003

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 2000 mm

99AC0014

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 3000 mm

99AC0015

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 5670 mm

99AC0027

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 6500 mm

01FE0049

Glass door slider.
- 6 piece pack

01FE0050

Glass door stainless steel slider.

01GM0001

Adhesive gasket for glass leaf.
- 6 m pack

Standard accessories

31PE0004

Photoelectric sensor.
- IP64

99BA0004

Pre-wired emergency battery kit.

Operator cross-section LUCE WORKS P

MyONE

 


MYONE Srl
Via Abbate Tommaso, 52
30020 Quarto D’Altino
(VE) - ITALY
T +39 0422 824384
Customer Care +39 0444 751030
info@myoneautomation.com


​P.IVA (IT) 04052150275

Capitale Sociale
€ 100.000 interamente versato
Registro Imprese Tribunale di Venezia


https://www.myoneautomation.com/theme/myone/img/logo.svg Via Abbate Tommaso, 52 - 30020 - Quarto D’Altino (VE) ITALY info@myoneautomation.com +39 0422 824384 +39 0422 824384