LUCE R

Operator for pedestrian access points used as escape routes in public or private locations.

LUCE R

Access points that are also used as escape routes within a public or private location require an operator designed to comply fully with regulations, ensuring safety and reliability. The Luce R automatic sliding door operator has a control unit with double electronic control and a double-winding motor, ensuring that the door will open in any situation, even when there is no power. The special TÜV-certified operation enables the operator to be installed without the need for other wired safety or anti-panic systems in the frame. Available in single-leaf (up to 140 kg) or double-leaf (up to 120+120 kg) versions. Operator for sliding doors designed to ensure maximum safety, reliability and above all certified (TÜV) operation without the need to install anti-panic devices in the frame. The operator has a double-winding brushless motor and integrated control unit with double electronic control. Every 24 hours the control unit runs functional tests on all electronic parts and safety systems to ensure that the door opens at any time in an emergency. Continuous operation guaranteed.

the preassembled operator is made up of: control unit | brushless motor | electronic control for emergency battery with battery | three-wheeled sliding carriages | anodised aluminium supporting profile and cover | belt return | mechanical end-stop | belt | cable guide | screw kit | lateral sides


1 sliding leaf
max. 140 kg

cod. A B
LUCER1901 900 mm 1900 mm
LUCER2101 1000 mm 2100 mm
LUCER2501 1200 mm 2500 mm
LUCER2901 1400 mm 2900 mm
LUCER3301 1600 mm 3300 mm
LUCER3701 1800 mm 3700 mm
LUCER4201 2000 mm 4200 mm
LUCER5001 2450 mm 5000 mm
LUCER6501 3100 mm 6500 mm

2 sliding leaves
max. 120 + 120 kg

cod. A B
LUCER1902 900 mm 1900 mm
LUCER2102 1000 mm 2100 mm
LUCER2502 1200 mm 2500 mm
LUCER2902 1400 mm 2900 mm
LUCER3302 1600 mm 3300 mm
LUCER3702 1800 mm 3700 mm
LUCER4202 2000 mm 4200 mm
LUCER5002 2450 mm 5000 mm
LUCER6502 3100 mm 6500 mm

*The values of the passage size (A) and of the leafare indicative and include an overlap of around 50 mm.

Power supply full range 100-240 Vac | 50/60 Hz
Power consumption 70 W
Power consumption in stand-by 10 W
Accessories power supply 24 Vdc = / 1 A max
Maximum speed 1 door 0,7 m/s
Maximum speed 2 doors 1,4 m/s
Maximum load 1 door 140 kg
Maximum load 2 doors 120 + 120 kg
Type and frequency of use continuous operation = 100%
Operating temperature -15°C / +50°C
Protection degree IP20
Data backup memory standard micro SD

Mandatory components for TÜV Thüringen certification

31RD0002

Opening and safety autotest double technology sensor for redundant automation devices.
- EN 16005. DIN 18650. IP54

31RD0004

Opening and safety autotest double technology sensor for redundant automation devices.
- EN 16005. DIN 18650. IP54

Framed door accessories - commercial frame

01AL0030

Aluminium floor guide for one leaf.
- L. 1000 mm

01AL0031

Aluminium floor guide for one leaf.
- L. 1500 mm

01AL0032

Aluminium floor guide for one leaf.
- L. 2000 mm

01AL0035

Aluminium floor guide for one leaf.
- L. 3000 mm

01FE0018

Floor guide slider.

01AL0008

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 1000 mm

01AL0009

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 1500 mm

01AL0010

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 2000 mm

01AL0015

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 3000 mm

01AL0016

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 5670 mm

01AL0020

Standard leaf fastening device complete with fixing brackets for the carriage.
- L. 6500 mm

90RM0053

Pair of leaf fixing brackets (1 leaf).

Glass door accessories - fastening set for glass leaves with pre-drilled holes

99AC0004

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 1000 mm

99AC0005

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 1500 mm

99AC0006

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 2000 mm

99AC0016

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 3000 mm

99AC0021

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 5670 mm

99AC0029

Fastening set for glass leaf (10-12 mm) with pre-drilled holes.
- L. 6500 mm

01FE0049

Glass door slider.
- 6 piece pack

01FE0050

Glass door stainless steel slider.

01GM0001

Adhesive gasket for glass leaf.
- 6 m pack

Glass door accessories - fastening clamp set for glass leaves

99AC0001

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 1000 mm

99AC0002

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 1500 mm

99AC0003

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 2000 mm

99AC0014

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 3000 mm

99AC0015

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 5670 mm

99AC0027

Fastening clamp set for glass leaf (10-12 mm thickness).
- L. 6500 mm

01FE0049

Glass door slider.
- 6 piece pack

01FE0050

Glass door stainless steel slider.

01GM0001

Adhesive gasket for glass leaf.
- 6 m pack

Standard accessories

99EB0004

Bistable electromechanical lock kit with release cord.

AQA.R

Digital selector device for Luce R.

AQA.CARD

Transponder card with NFC technology.
- 10 piece pack

Operator cross-section LUCE R

MyONE

 


MYONE Srl
Via Abbate Tommaso, 52
30020 Quarto D’Altino
(VE) - ITALY
T +39 0422 824384
Customer Care +39 0444 751030
info@myoneautomation.com


​P.IVA (IT) 04052150275

Capitale Sociale
€ 100.000 interamente versato
Registro Imprese Tribunale di Venezia


https://www.myoneautomation.com/theme/myone/img/logo.svg Via Abbate Tommaso, 52 - 30020 - Quarto D’Altino (VE) ITALY info@myoneautomation.com +39 0422 824384 +39 0422 824384